How many pounds can a chainsaw winch pull?
Pulling capacity depends on the size of the saw you use for power, but maximum single line pull is about 4000 lbs. If this isn’t enough, its pull can be doubled by using a snatch block and doubling back. We usually recommend powering the winch with a modern saw with an engine size of 3.0 cu.in. or larger.
How does a chain saw winch work?
The oil-filled gearbox (or transmission) on the Lewis Winch then transforms the high RPM of the chainsaw into low RPM torque that drives the Lewis Winch cable spool, which rolls up the cable and pulls in the load. It’s that simple!
What is the best chainsaw for heavy use?
5 Best Professional Chainsaw Comparisons
| MODEL | FEATURES |
|---|---|
| Husqvarna 460 24-Inch Rancher | Weight: 21 lbs Bar Length: 24 inch Warranty: Up to 4 years |
| Echo CS-590 20″ Timber Wolf | Weight: 17 lbs Bar Length: 20 inches Warranty: 5-year consumer |
| TIMBERPRO Professional Series | Weight: 13 lbs Bar Length: 20 inches Warranty: 2-year consumer |
What is a PTO winch?
PTO is a Power Take Off winch. They derive their power from the running motor. More info from 4wdonline.com: The PTO winch is driven by the engine through the gearbox and a power take-off unit, usually mounted on the rear of the transfer case.
What is a come along winch?
A come-a-long (comealong, come-along, power puller) is a hand-operated winch with a ratchet used to pull objects. The drum is wrapped with wire rope. A similar tool that uses a nylon strap is used to straighten trees, as it straightens gradually over time, therefore not splitting the trunk.
What kind of winch do you need for a chainsaw?
This is the only portable winch you need. Also from Lewis Winch is the Lewis Multi Drill. This unit was designed to be attached to the side of a chainsaw and to drive an earth auger in all kinds of soil and weather conditions. The Lewis Universal Multi Drill and Direct Drive Drill fits most chainsaws.
How big of a line can a Lewis winch pull?
The Lewis Winch 400-MK2 Is a high-powered portable winch that uses a chainsaw as a power-head. The Lewis Winch will pull 4,000 lbs. in a straight line, and up to 8,000 lbs using one Lewis Winch Snatch Block. This is the only portable winch you need.
What’s the speed of a Lewis chainsaw winch?
The winch moves at a speed of 60-80 Ft/min through an oil-bathed gearbox with steel gears. You can secure the Lewis Winch 400-MK2 chainsaw winch with a ground anchor or a versatile trailer hitch attachment.
How does the new etug chainsaw winch work?
The new ETUG features the moving fairlead which makes using your winch safer and easier. The fairlead moves in a 270° radius guiding the rope onto the capstan head eliminating the chance of the rope slipping off the capstan and relieving lateral strain on the system.