What does SpaGuard Optimizer Plus do?

SpaGuard Optimizer Plus is specially formulated for use in spas and hot tubs. SpaGuard Optimizer Plus provides the foloowing benefits to spa/hot tub water: enhances water comfort and clarity, improves chemical effectiveness, and provides corrosion protection to metal surfaces.

What is Optimizer Plus?

Optimizer is a new and unique product that “optimizes” the performance of the chemicals in your pool water, suppresses algae growth, and makes swimming more comfortable for your skin and eyes, all at the same time.

How do I use Optimizer Plus?

How to Use Optimizer Plus

1. After filling your hot tub with fresh water, add 200g (3.5 capfuls) of Optimizer Plus for every 1,000L of hot tub water.
2. Run the pump for 15 minutes.
3. Do not shock hot tub for at least 4 hours.

What is spa enhancer?

Enhancers bring out the beauty in your water and keep your filter working at maximum efficiency so you have more time soaking and less time outside of your spa.

What is Spa Lite?

SpaGuard’s Spa Lite is an oxygen-based shock treatment that reduces chemical smells and restores water. Spa Lite also has clarifiers that enhance the hot tub’s filtration. It is compatible with spas using either chlorine or bromine and can also be used on hot tubs with ozonators.

What does BioGuard Optimizer do?

Product Description BioGuard Optimizer Plus helps the BioGuard brominating, chlorinating or biguanide programs work more efficiently. It buffers and helps keep the water balanced. In addition to creating soft and soothing water, this product helps suppress algae growth and is proven to improve water clarity.

How much BioGuard optimizer should I add?

Also, backwash or clean filter before adding this product. Then add 15 lb of BioGuard Optimizer per 15,000 gallons of pool water (1.5 per 1,000 gallons). Slowly add BioGuard Optimizer into your pool skimmer with the pump and circulation system on. Allow pool water to circulate for 4-8 hours after application.

How do you use SpaGuard?

1. Add ½ capful SpaGuard Spa Complete per 250 gallons of spa water at low-speed circulation. 2. You can use the tub 15 minutes after this is applied to the water.

What does shocking a spa do?

Shocking a spa means applying an ample dose of chlorine (sodium dichlor) or non-chlorine shock (potassium monopersulfate or MPS). One purpose of this treatment is to break-down organic waste contaminants which cause odor and cloudy water. After treatment, water quality and clarity is often completely restored.

How do you use enhanced shocks?

Apply product at a rate of 3 tablespoons per 500 gallons. With pump in operation, apply the entire treatment dosage at one time. Apply directly to spa water only. Do not add through a skimmer or any automatic dispersing device.

What does adding borax to a pool do?

Borax is tremendously effective at stabilizing alkalinity and acting as a pH buffer in swimming pools. While they do raise pH levels, they also raise the total alkalinity of the water. Increased alkalinity causes the pH level to fluctuate, which defeats the purpose of adding chemicals to stabilize the water.

Is SpaGuard a good product?

This is a great product! I have a large Sundance Spa and put it in after heavy use or about twice per week when I see the water getting cloudy. I use the recommended amount for my water capacity.