How long do Hayward pool Motors last?

between eight to 12 years
Well-maintained high-quality pool pumps can last between eight to 12 years. If you’ve missed out on many critical pool services, however, you can expect your pump to fail sooner. If your pump is more than half a decade old and it’s becoming more and more problematic, it’s best to get a new one.

Can you replace just the motor on a pool pump?

If you have an older pool pump or it’s motor is running loud or just stop working, you’ll want to consider replacing your pool pump motor. You do not have to replace the whole pool pump and as this guide will show, replacing your pool pump motor is not difficult.

How long does a pool pump motor last?

Pool Pumps Your pool’s pump is the wet end of the operation, it houses the pump basket. Pumps should last through the initially installed motor and perhaps as many as two or three replacement motors, usually 10-12 years. Modern pumps are made of hard plastic and will over time warp.

What is the warranty on a Hayward pool pump?

All products manufactured by Hayward Flow Control are warranted against defects in material or workmanship for a period of three years from date of shipment. Our sole obligation under this warranty is to repair or replace, at our option, any product or any part or parts thereof found to be defective.

Is it worth fixing a pool pump?

Many pool pump motors last less than 5 years; the last thing you want to do is put $100 worth of repairs into a motor that was destined to die in 6 months anyway. Plus none of your replacement parts will carry a warranty whereas a complete new motor will.

How long should I run my pool pump?

As long as it runs for at least 8 hours in every 24-hour period, you’re good to go. Overall, the lessons learned today is you should run your pool pump an average 8 hours a day to properly circulate and clean your water. The pump should push your entire pool in gallons in this 8 hour period of time.

Why is my pool pump running but not pumping water?

The pool pump runs but has low water flow. This means your pump needs to be primed because something has interrupted its suction or water flow. It could be something blocking it, a dirty pool filter, or too much air in the system. If there’s something blocking your pump’s suction, check your filter gauge.

How do you know if your pool pump motor is bad?

Strange Sounds Coming from the Motor If you hear a loud grinding sound, it’s usually a sign that the bearings are getting worn down. The bearings are the part of the machine that keep the motor running. Your pump could be leaking water, or the bearings might need to be replaced instead of the entire motor.

How do you free a stuck pool pump impeller?

How do you fix a clogged pump impeller?

1. Turn off the electricity running to the pump motor at your circuit breaker.
2. Remove the pump basket lid and the pump basket.
3. You can use a bent coat hanger or just your fingers to reach into the impeller.
4. Pull out anything you find and clean your hook now and again.

Which is the best pool pump motor replacement?

Hayward Super Pump Motor Replacement. BEST REPLACEMENT VIDEO FOR POOL PUMPS!!!!! – YouTube

What happens when you replace a pool motor?

The manufacturer can spot a seal failure pretty easily as the face of the motor will get a scale build-up and often the shaft of the motor will completely seize. Typically if you use your old shaft seal, it will not line up properly with the new motor and you will have leakage.

Which is the best variable speed pool motor?

Variable Speed Motors (80% Savings) – Variable speed motors have gained widespread popularity over the past few years as they are the most energy efficient motors. Variable speed motors allow you to dial the motor into the exact RPM. You would typically select a range of 600 – 3450 RPMs.

How much does a dual speed pool motor cost?

Dual speed motors range from $300 – $450 depending on your horsepower. Variable Speed Motors (80% Savings) – Variable speed motors have gained widespread popularity over the past few years as they are the most energy efficient motors. Variable speed motors allow you to dial the motor into the exact RPM.