Is ddr3 1333 Good for Gaming?
Yes it definitely is. Recent benchmarks show that there is little difference, like 5% between 1333Mhz or super high-end 2133Mhz modules. So it’s kind of a waste to overspend on expensive RAM. Your extra dollars will be better spent on a SSD, or a better GPU or CPU.
Can you use ddr3 1333 instead of 1600?
Distinguished. Yes it will run just fine. The slot can handle 1600mhz stock, and more with OC.
Can you put ddr3 1333 instead of 1066?
Both memory modules should work and operate at 1066 MHz. If properly supported, the modules will operate in dual-channel mode, but both modules will be limited to the slower one, which is unlikely to be noticeable. There should not be any significant problems in terms of system performance or stability.
Can I run my 1600 MHz ddr3 RAM on a motherboard which supports 1066 1333 MHz ddr3 RAM speed?
Yes you can run the ram, but it will be downclocked to 1333 mhz.
Can I put 1600MHz RAM in a 800mhz slot?
Can you put 1600 Mhz RAM in 1066/800 Mhz RAM Slot – NO It Might not work! If you are upgrading an old PC that has DDR3 1066/800 Mhz RAM slots on its motherboard and planning to upgrade, then you might not be able to find new RAM modules with that frequency.
What does 1600MHz DDR3 mean?
Kingston Memory he next generation of DDR3 has arrived. New chipsets and processors from AMD® and Intel® now support memory operating at 1600MT/s (aka 1600MHz). DDR3-1600 memory has a module classification of PC3-12800, which effectively means the peak data rate of the module is 12.8GB/sec (see table).
Can I put 1600MHz RAM in a 1066MHz slot?
So the answer is that 1600 Mhz memory modules may not work in a slot that supports only upto 1066 Mhz. However the 1333 Mhz RAM worked.
Can I use 8gb RAM together with 4gb RAM?
“You Can’t Mix RAM Sizes” Most laptops or computers come with at least two slots for RAM sticks, if not more. Most modern motherboards will provide four RAM slots. There’s a prevailing misconception you cannot use different RAM sizes together or that you cannot mix RAM brands. Simply put, that’s not true.
Why does my 1600mhz RAM shows 1333MHz?
You do have to enable XMP profile in BIOS to get 1600 MHz. 1333 is the default and every RAM set rated for that speed or faster will default to 1333. Go to the overclocking section of your BIOS and poke around for RAM timing and there should be an option for enable XMP. Just save and boot into windows to check it.