What is a 1993 Harley Sportster worth?
Values
Excellent | $5,735 |
Very Good | $3,640 |
Good | $1,585 |
Fair | $805 |
Poor | N/A |
How many gears does a Harley Sportster have?
5 Speed
There are 5 Speed gears available in Harley Davidson Iron 883….Engine Specifications of Harley Davidson Iron 883.
Emission Type : | BS6 |
---|---|
Bore : | 76.2 mm |
Gears : | 5 Speed |
Transmission Type : | Manual |
Transmission : | Manual |
Does a Sportster have transmission fluid?
The Sportster 883 is a motorcycle made by Harley Davidson. The transmission fluid is part of the bike’s oil system. You need to checking the fluid level periodically to ensure the engine runs smoothly.
What kind of transmission fluid does a Harley Davidson Sportster take?
The manufacturer recommends using 20w50 oil. Make sure that the oil you use is approved for wet clutches.
What’s the correct torque for a Sportster transmission?
The correct torque specification is 14 – 21 ft-lbs (168 – 252 in-lbs). Insert the nozzle of a funnel into the primary chain inspection hole. Pouring slowly, pour approximately 1 qt of oil into the transmission. As you pour, watch the clutch inspection hole. Make sure that the oil level stays below the edge of the clutch inspection hole.
How long does it take to change oil in a Harley Davidson Sportster?
Place a drain pan underneath the drain plug. Using a wrench, unscrew the transmission drain plug and remove it. Your drain plug may be 5/8″ or 3/4″ depending on the year. Allow all the oil to drain out of the transmission. It should take about five minutes.
What kind of exhaust does a Harley Davidson Sportster use?
Harley Davidson Sportster 1200 Sreamin Eagle Exhaust Sound. Corvettes at Palm Beach International Race Track. An error occurred while retrieving sharing information. Please try again later. How To Harley Davidson Neutral Light Switch Repair.
How to remove clutch cover from Sportster Evolution?
Insert a heavy duty spudger or similar prying tool into the gap between the clutch inspection cover and the transmission housing near where clutch cable enters the housing. Gently pry the clutch inspection cover away from the transmission housing. The clutch cover spring may fall out.