Can you put joint compound over paint?

You use drywall joint compound for almost all drywall repairs. Unfortunately, it doesn’t stick well to gloss or semi-gloss paint. Use a strong detergent like trisodium phosphate to clean gloss or semi-gloss paint. Not only does it cut grease and dirt, it etches the finish and improves paint adhesion.

Can you spackle over latex paint?

Yes. However, keep in mind that unless you prime the spackled spot, you will probably be able to see it after putting on your color coat. Even with priming the texture will be a bit different and the spackled area will absorb the paint a bit different.

Can I skim coat over latex paint?

There normally isn’t any issues with skim coating over latex paint, if the paint has a sheen – scuff sand first.

Should I prime before applying joint compound?

Generally, you don’t need to apply primer before joint compound on painted surfaces. Joint compound adheres well to many textures, so primer isn’t necessary for adhesion. Apply the compound as smoothly as possible using wide drywall knives, which decreases the number of wiping lines and marks you make.

Can you paint directly on spackle?

Simply painting over the spackle spots often allows them to bleed through the coat of paint in a manner that is commonly referred to as “flashing.” It takes a few extra steps after repairing your wall to ensure that the spackle spots can be well-hidden and unobtrusive.

Can you use spackling over paint?

Spackling is done before the drywall is painted. It is also recommended even if you are re-painting existing walls. Spackling ensures that the existing walls are properly repaired, which helps to provide a better, finished surface.

Can I skim over paint?

Yes, you can plaster over paint, however, there are factors which should be considered first. If the paint on your wall is in good condition, then a professional will likely be able to start the plastering process straight away. Paint that is in ‘good condition’ won’t have damages or cracks and won’t be peeling either.

Can you use joint compound to fill nail holes?

To properly fill nail holes, you’ll want to use wall putty or drywall compound. Let the putty dry and follow the instructions from the putty. Drywall compound – With nail holes that have pulled some of the wall out, you’ll want to use drywall compound (also called joint compound or mud).

Do you have to seal joint compound?

It makes a good base for paint or wallpaper but must be properly sealed because the paper covering and the tape and joint compound used to seal seams have different porosity. Not sealing drywall with primer paint will result in splotches and irregularities in the finish paint.

What happens if you paint over a joint compound?

Painting over spackle or joint compound without properly sanding or priming it will result in an irregular surface or dull spots where the paint isn’t blended in properly. Using the wrong type of primer may even cause shiny spots in the finished paint. The same goes for exterior spackle. Video of the Day

What should I do about joint compound primer?

You may need to thin out some of your primer and stripe coat over the joint compound then follow up with the remainder of the primer. This may seem like a pain but it beats haveing peeling paint.

What happens if you paint over a Spackle joint?

Can you use latex paint instead of primer on drywall?

You’ll want to clear away any dust caused by the sanding with a soft cloth wiped over the walls. Latex paint may act as a suitable replacement for primer on drywall. Jeff Croft, a professional drywall installer and owner of Tape Finish Texture Drywall, warns against using latex paint watered down.