What is the 20m calling frequency?

The 20-meter or 14-MHz amateur radio band is a portion of the shortwave radio spectrum, comprising frequencies stretching from 14.000 MHz to 14.350 MHz. The 20-meter band is widely considered among the best for long-distance communication (DXing), and is one of the most popular—and crowded—during contests.

What is 12m radio?

The World Administrative Radio Conference (WARC) bands are three portions of the shortwave radio spectrum used by licensed and/or certified amateur radio operators. They consist of 30 meters (10.100–10.150 MHz), 17 meters (18.068–18.168 MHz) and 12 meters (24.890–24.990 MHz).

Is 20 meters USB or LSB?

SSB Frequency Lists

Who uses SSB radio?

SSB (Single Sideband) is an obscure but very important way to communicate via radio. It is used primarily for two-way voice communication by ham radio operators, aircraft and air traffic control (ATC), ships at sea, military and spy networks. Occasionally some shortwave broadcast stations use this format.

Why is it called ham radio?

Well, it goes like this: The word “HAM” as applied to 1908 was the station CALL of the first amateur wireless station operated by some amateurs of the Harvard Radio Club. They were ALBERT S. HYMAN, BOB ALMY and POOGIE MURRAY. They then decided to use only the first letter of each name and the station CALL became “HAM”.

Is 30 meters upper or lower sideband?

You may now be asking, “Which sideband is used with SSB mode?” The convention used by hams is that bands above the 30-meter band (frequencies greater than 10 MHz), including all VHF and UHF bands, use the upper sideband (USB) – the band of frequencies adjacent to, and higher than, the carrier frequency.

How big is the 20 meter radio band?

From Wikipedia, the free encyclopedia The 20-meter or 14-MHz amateur radio band is a portion of the shortwave radio spectrum, comprising frequencies stretching from 14.000 MHz to 14.350 MHz.

What do you need to know about voicemeeter?

Voicemeeter is Audio Mixer Application endowed with Virtual Audio Device used as Virtual I/O to mix and manage any audio sources from or to any audio devices or applications. For first use, it’s highly recommended to follow user manual step by step, especially step ZERO of the documentation.

Why is the 20 meter band Good for DX?

Several factors contribute to this, including the band’s large size, the relatively small size of antennas tuned to it (especially as compared to antennas for the 40-meter band or the 80-meter band) and its good potential for daytime DX operation even in unfavorable propagation conditions. This section needs expansion. You can help by adding to it.

What are the frequencies in the 160 meter band?

The 160 Meter Band frequencies are just above commercial AM broadcast bands. The HF bands are where you are going to find most of your DX or long-distance stations. These frequencies span from 3.5 MH (80 meters) to 29.7 MHz (10 meters). 80 Meters consists of the frequencies from 3.5–4.0 MHz (3500–4000 kHz).