Where will you locate the bathroom in the floor plan?

The bathroom needs to be located in a private position in the floor plan within easy reach of the bedrooms. Access to natural light if possible and are well lit. Located efficiently next door to or above or below other rooms using water such as other bathrooms, the kitchen and the utility room.

What is the building code for bathrooms?

Bathroom building code typically says that toilets need at least 21 inches of clearance in front of the toilet. Side-to-side clearance: a minimum of 15 inches from the center-line of the toilet to the nearest obstruction. However, 18 inches provides better clearance in most cases.

What is a small bathroom size?

SMALL: A small bathroom is typically around 35-40 square feet. While space is definitely at a premium in a small bathroom, decorating this area can be a valuable and exciting interior decorating lesson in maximizing space and utilizing color to liven up the room, but also to visually enlarge it.

What is the minimum width for a bathroom?

This means that if the door width is 32 inches, you must have a passage of 32 inches wide and 32 inches long of clear space leading into the bathroom. Once inside the bathroom, you will need a minimum of 21 inches of space in front of the toilet, sink, tub or bidet and 24 inches of clear space in front of a shower.

How to choose a bathroom layout?

you give the bathroom plenty of open space no matter its size.

What is the best bathroom layout?

The best bathroom layouts include a blend of four types of light: task, ambient, accent, and decorative. Lighting should happen from the ceiling, from the walls, in the bathing zone, and wherever else improves the use and safety of the space.

What is a typical bathroom layout?

The most common bathroom layout is the single plumbed wall. All fixtures are lined up and served from one compact source of drains, water supplies and venting. This saves on plumbing installation and provides efficient distribution of heated water, especially when the wall is near a water heater.

How to plan your bathroom design?

Part 2 of 3: Designing the Layout Measure the area of your bathroom with a tape measure. Draw plans on a piece of graph paper to get ideas for what to do with the space. Locate where your water lines and electrical outlets are. Pick a fixture to use as the focal point to design around. Choose bright ceiling and vanity lights. Leave room for storage in your bathroom.