How do you program a One For All URC remote?

How to Program your One For All® remote

1. PRESS the button for the device you want to program,(TV,VCR,CABLE,etc.), then RELEASE.
2. PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
3. ENTER the 3 digit code for your brand.
4. You should receive 2 quick flashes after entering your code.

How do you code search one for all remote?

For example, to find out which code is operating your TV:

1. On the remote control, press TV once.
2. Press and hold SET until the LED (red light) blinks twice, then release SET.
3. Enter 9 9 0.
4. To view the code for the first digit, press 1 once.
5. Repeat step 4 three more times for remaining digits.

How do I reset my one for all remote?

If you wish to return the remote to the default settings, you can perform the following:

1. Hold down the TV Power and Back keys until the ring blinks twice in yellow.
2. Press OPTIONS, REPLAY and HOME consecutively.
3. The ring will blink red 4 times and the remote is now reset.

How do I sync my one for all remote to my TV?

Step 1: First, press down the MAGIC key on your remote. Step 2: Next, select the device you want to control. Step 3: Finally, hold down the digit on the remote for your brand & device (e.g. 6 for Samsung TV). As soon as the device turns off, release the key and the LED on the remote will blink twice.

Why is my one for all remote blinking red?

If the red LED shows one long blink at step 5, the function was not learned correctly, please try again from step 3. If you find one or more keys don’t work properly after set up, you can re-enter the learning mode at any time by repeating the procedure from step 2.

How do you find out your TV code?

Find the code Go to Settings . Scroll to Link with TV code. A blue TV code will show on your TV.

Where is the code for a universal remote?

Universal Remote Codes

• Locate the model and code list version sticker by opening the battery compartment and removing the batteries.
• Identify the code list version.
• Access the remote codes for your version.
• Press and hold down the SETUP button until the remote’s red light turns on.

How do you set a remote to a TV?

Turn on your TV or another device you wish to control. Press and hold the corresponding DEVICE and POWER buttons on the remote at the same time. Wait until the power button comes on and then release both buttons. Pointing the remote at the TV or another device, press the Power button on the remote and wait 2 seconds.

Why won’t my one for all remote work?

Reinsert the battery – the LED should blink twice. Press the digits 2 and 8 simultaneously within 6 seconds – the LED should blink twice. Enter the code 9 8 1, the LED will blink 4 times. The remote is now reset to its factory defaults.

Can any remote be used with any TV?

Universal remote controls are not brand specific, so you can use them with any device model from almost every electronics manufacturer. Most universal remotes work with multiple devices, so they can control your TV, cable box, and other peripherals such as DVD players and streaming devices.