How do I change the battery in my thinner scale?

There is a separate battery compartment underneath with a cover. The cover is easy to open, pop out the old battery and insert a new 9 Volt battery.

What type of battery does the WW scale take?

CR2032 lithium battery
This scale operates on one 3 volt CR2032 lithium battery (installed). Remove the battery compartment cover from the back of the scale. Take care when removing and replacing the battery compartment cover. To replace the battery: 1.

Why is my Weight Watchers scale not working?

If scale still does not work, replace battery. In the event that the scale batteries need to be replaced (display shows “Lo”), remove the screw from the battery cover on the bottom of the scale and remove the cover. Dispose of the old batteries properly. Do not attempt to open the scale or to remove any components.

What kind of battery does a Taylor lithium scale use?

CR2032 Lithium batteries
Use two CR2032 Lithium batteries for weighing and one 9 volt alkaline battery for voice.

How do I reset my weight Watchers digital scale?

If you wish to erase all user data, you can reset the scale: the reset button is on the bottom of the scale. Insert a wire or paper clip into the hole and push down (similar to a computer rest). The scale display will show “Clr”. This will restore the factory settings and erase all user information.

Why does my Weight Watchers scale give different readings?

#1 Every time a digital scale is moved it needs to be calibrated. Initializing the scale resets the internal parts allowing the scale to find the correct “zero” weight and ensure accurate readings. If the scale is moved and you do NOT calibrate it, you are likely to see fluctuations in your weight.

Is Weight Watchers scale accurate?

The weight readings are very accurate when compared with other scales. Even after over a year of regular use, the scale is reliable, right down to the ounce. It may sound complicated, after all, it does connect to Bluetooth and send your weigh-in results to your Weight Watchers app, but it is very easy to use.

How do you change the battery on a Weight Watchers scale?

Insert the new battery/ies, making sure the plus and minus (+ / -) poles are aligned properly according to the diagram inside the compartment. Replace the compartment cover and tighten the screw by turning it clockwise. Be sure not to over tighten! Turn the scale back over and test it immediately.

Where is the battery on a weight scale?

There is a switch on the underside of the scale that allows you to select pounds or kilograms as your weight measurement of choice. Flip the switch to the appropriate side. Slide open the top of the battery compartment, also located on the underside of the scale, and slide a 3V lithium battery inside. Set the scale on a level surface.

How do you measure your weight on Weight Watchers?

Using the Scale Tap the center of the scale with your toe to turn on the digital display. The screen will read “888.8” while the Weight Watchers scale is powering up 1. When the screen reading switches to “00.0,” it is ready to measure your weight.

What kind of battery does WW scale by Conair use?

Your WW Scale by Conair ™ is powered by one of two different types of batteries: lithium coin battery (CR2032) or alkaline batteries (AAA). CR-2032 – 3 volt lithium battery AAA – 1.5 volt alkaline dry-cell battery