What kind of oil does a 2007 SAAB 93 take?
Engine Oil
| Viscosity: | 0W-30, 0W-40, 5W-30, 5W-40 (All TEMPS) |
|---|---|
| Capacity: | 6.3 quarts (with filter)After refill check oil level. |
| Torque: | 18 ft/lbs (Oil Drain Plug) |
How much oil does a SAAB 93 take?
Engine Oil 6 quarts (with filter)After refill check oil level.
What type of oil does a SAAB 93 take?
Engine Oil SAE 10W-30 and SAE 10W-40 are preferred.
How much oil does a SAAB 93 1.9 take?
Model: Saab 9-3 Sport (2002 – 2011)
| Engine | Capacity/Filter capacity litres(liters) | |
|---|---|---|
| 9-3 Sport 1.9 TiD (88 kW) (2004 – 2011) | Z19DT | 4.6 |
| 9-3 Sport 1.9 TiD (110 kW) (2004 – 2011) | Z19DTH | 4.6 |
| 9-3 Sport 1.9 TTiD (132 kW) (2007 – 2011) | Z19DTR | 4.6 |
| 9-3 Sport 2.2 TiD (2001 – 2004) | D223L | 5.5 |
How do you reset the oil light on a 2007 Saab 9-3?
Oil Change Light Reset Saab 9-3 2007 2008 2009
- Turn the ignition to the “RUN” position.
- Using the up and down arrows, select “SETTINGS”.
- Press and hold the “SET” button until a sound is heard.
- Select time for service.
- Press “SET” button. “RESET SERVICE IND?” will be displayed, select “YES”.
How do you change the oil in a Saab 9-3?
How to Change Engine Oil for Saab 9-3
- Step 1: Get Prepared.
- Step 2: Open the Hood.
- Step 3: Remove the Engine Cover.
- Step 4: Carefully Move the Atmosphere Pressure Sensor and Manifold Absolute Pressure Sensor Cables That Blocks the Oil Filter Cover Aside.
- Step 5: Open the Oil Filter Cover With the Oil Filter Tool.
How do you reset the oil light on a 2007 Saab 9 3?
What type of oil does a 2008 Saab 93 take?
What kind of oil does a Saab 9-3 2.0 t take?
Motor oil Helix Ultra AG 5W-30 fully complies with the specification for the 9-3 2.0 T Bio Power Estate (154kW) (PT) (2008-) and is the ideal lubricant for this car SAAB.
How do you reset the service light on a Saab 93?
Reset service light indicator Saab 9-3
- Switch On the ignition.
- Depress & release the CLEAR button.
- Reset by push the CLEAR button & hold down button for at least eight seconds, until ”SERVICE” warning light appears on the display and a chime sounds.
The oil filter is removed by pulling while twisting it. The oil filter cover is supposed to be tightened to 18 ft.lbs. or 25 Nm, which is slightly more than finger tight, perhaps ¼ turn more than finger tight. Re-install the black plastic engine cover after changing the oil filter.
How to reset the SID on a Saab 9-3?
To reset the SID, push the “customize” button then scroll the menu to “System Settings”, which is the 2nd choice. Push the SID knob to select it. Then scroll to “Service Indicator” (2nd to last choice, “back” is the last choice), push the SID knob to select it. It will then show the oil life remaining, such as “53%, 283 days”.
What is the engine number on a Saab 9-3?
Around 2008, part number 93175493 was superceded by 12605566. AC Delco PF457G: used to be sold by Saturn dealers (before the brand was discontinued) for about $2 less than Saab dealer’s 93175493/Hengst E630H.
How does the oil life monitor work on a GM Saab?
The oil life monitor in any GM vehicle has no idea what type of oil is being put into an engine, the ‘software’ assumes that the proper type (standard) and viscosity of oil is being put into the engine so that is what is basis its calculations on.