What is a Turbosmart boost tee?

All Turbosmart Gated Boost Controllers feature our exclusive Gate feature, which minimizes wastegate creep and can improve turbo response by up to 800 rpm earlier in the rev range – this means that you can increase the performance and response from your engine without even raising the maximum boost level.

What is the purpose of a boost controller?

A boost controller is a device to control the boost level produced in the intake manifold of a turbocharged or supercharged engine by affecting the air pressure delivered to the pneumatic and mechanical wastegate actuator.

Are boost controllers safe?

Boost controllers are just as safe as the people who use them, so as long as you dont boost over 0.8bar (safe level for syock tubby without it going boom), then you will be fine.

What is a good boost pressure?

Boost And Drive Pressures A drive-to-boost pressure ratio of 1:1 is ideal, although in reality, drive pressure is usually a bit higher than boost pressure. If a situation occurs where drive pressure far exceeds boost pressure (say, 35 psi boost, 65 psi drive pressure) then you might be looking at trouble.

Does boost need controller?

Control Freak Joking and chastising aside, you only need a boost controller if you want to easily raise the boost higher than the wastegate spring(s) are set for….. without having to pull the wastegates apart to change springs. It doesn’t matter how many turbos there.

How does a Turbosmart electronic boost controller work?

Turbosmart electronic boost controllers allow you to control three individual characteristics of your boost, by adjusting three easy to set parameters: The maximum boost pressure (set point), The spool-up rate of the turbocharger (wastegate pressure), and the reaction time of the controller (sensitivity).

Which is the best boost controller on the market?

The Turbosmart e-Boost range of electronic boost management systems are one of the most popular, powerful, and user-friendly ranges of electronic boost controllers on the market. Engineered to win, the e-Boost controllers give you the ultimate control over the boost curve with smart features designed for one thing – performance.

What can I do with the eboost2 boost controller?

But e-Boost2 is a lot more than just a boost controller – it can also control water spray, methanol or nitrous injection, manage shift/warning lights and read/monitor RPM. The e-Boost2 has been effectively controlling up to six stages of boost by gear, boost by rpm, boost by time, and more, all the way up to 60 psi for over a decade.

How do you attach a boost controller to a car?

Mount your boost controller bracket onto the vehicle, then attach the boost controller onto the bracket with the supplied screws. Make sure the boost dial is turned completely anti-clockwise before making adjustments. See the full range of Manual Boost Controllers here.