What adhesive to use for stainless steel splashback?

Use a silicone, ‘Grip Fill’ or similar product. Apply the splashback to the wall and push firmly to the wall to ensure a good contact between the wall and the adhesive. Always refer to the adhesive manufacturers instructions regarding the length of time required for the adhesive to cure or dry.

How thick should a splashback be?

A: Splashback thickness is usually 6mm, but we can do other thicknesses e.g. 8mm.

Can you put stainless steel splashback over tiles?

1Prepare to install the stainless steel splashback If you need to install it onto tiles, check that the tiles are level and set at the same height as your splashback. Now remove the protective covering and apply beads of silicone every 100mm along the back of the splashback.

How high is a standard kitchen splashback?

600mm
A traditional tiled kitchen splashback The height of the splashback is normally 600mm and you can tile this block in its entirety.

Are splashbacks see through?

Clear acrylic splashbacks are available made to measure in a choice of various thicknesses. Transparent splashbacks protect kitchen walls against accidental splashes and spills while remaining visually subtle simply showing the wall colour through the material.

Can you cut stainless steel splashback?

For a sleek, modern alternative to tiles, a kitchen splashback is the perfect finishing touch. Simple to install, this 90cm stainless steel splashback can be cut to size using a standard tile cutter, or jigsaw.

Can you fit a splashback over tiles?

Splashbacks can be installed over existing tiles, providing they’re securely attached to the wall and there are no cracks or broken tiles which might impact the adhesion of the panel. Make sure the tiles are level with no high spots and remove any uneven tiles which might distort the final surface of the splashback.

What is the thickness of stainless steel splashbacks?

They are non-magnetic and are supplied in a thickness of 0.9mm. They are flat steel and can be fixed directly to the wall with either glue or screws. Grade 304 is the commercial grade of stainless steel and is the most commonly used grade; suitable for most general applications.

Can a splashback be made to a custom size?

All splashbacks can be made to custom sizes at very competitive prices. All at great prices our splashbacks can be made to custom sizes even including long and narrow designs for upstands. You have no items to compare. You have no items in your wish list.

Can you return a bespoke stainless steel splashback?

Savings are applied automatically in your basket. Order your Bespoke Splashback using the splashback calculator. Please note the price shown in the calculator includes free cutting. We will not accept return of splashbacks as they are cut to your specification. Once cut we are unable to cancel the order even if it has not been dispatched.

How long does it take to get Amazon splashback?

Usually dispatched within 4 to 5 days. . Usually dispatched within 3 to 4 days. . Usually dispatched within 6 to 10 days. . Usually dispatched within 4 to 5 days. . . . Usually dispatched within 6 to 10 days.