How do you remove the tub from a Kenmore Oasis washing machine?

How to Take the Tub Off a Kenmore Elite Oasis Washer

1. Unplug the power cord.
2. Lift the console up and back.
3. Disconnect the electrical connector leading to the control console by hand.
4. Unhook the clips around the edge of the tub.
5. Pry the plastic cap off the top of the agitator with the flat-head screwdriver.

Why won’t my Kenmore washer drain?

If the washer won’t drain water the drain pump might be defective. It’s also common for a small sock or other article of clothing to get caught in the drain pump or in the drain hose. Check both for an obstruction before replacing the pump. If the washer won’t drain there might be a clogged pump or hose.

How to remove the spin basket from a Kenmore washer?

There should be two screws at the bottom of the front panel that need to be removed. You can view the parts list diagram for your washer on the website. This may help you with the disassembly. Remove the top panel of the washer. Remove the tub ring. Remove the spin basket from the tub.

How do I remove the tub Assembly from a Kenmore stack?

There should be two screws at the bottom of the front panel that need to be removed. You can view the parts list diagram for your washer on the website. This may help you with the disassembly. Remove the top panel of the washer. Remove the tub ring. Remove the spin basket from the tub. Remove the trunnion.

How to replace bearings / drum on small front loader washer?

How to Replace Bearings/Drum on a small front loader washer. Como concertar maquina de lavar roupa. – YouTube How to Replace Bearings/Drum on a small front loader washer.

Why is water leaking from the bottom of my Kenmore tub?

Water seems to be leaking from the tub where the transmission shaft goes through the bottom of the tub. This is on a Kenmore laundry center model 417.99980100. Share it!