How is LDL calculated?
The traditional Friedewald equation estimates LDL cholesterol this way: total cholesterol minus HDL cholesterol minus triglycerides divided by five.
How do you convert cholesterol readings?
Conversion for TC (total cholesterol), HDL (high density lipoprotein) and LDL (low density lipoprotein)* † : To get from SI units (mmol/L) to mg/dL multiply by 38.67. To get from mg/dL to SI (in mmol/L) multiply by 0.02586.
What is normal LDL cholesterol in mmol L?
An LDL cholesterol level of less than less than 2.6 mmol/L (100 mg/dL) is considered optimal. 2.6 to 3.4 (100 to 129) is considered near optimal. 3.5 to 4.1 (130 to 159) is considered borderline high.
How much is mmol L to mg dL?
mmol/L in mg/dL, conversion factor: 1 mmol/L = 18,018 mg/dL
| mmol/L | 0.6 | 2.8 |
|---|---|---|
| mg/dL | 11 | 50 |
What is a good number for LDL cholesterol?
Men age 20 or older:
| Type of Cholesterol | Healthy Level |
|---|---|
| Total Cholesterol | 125 to 200mg/dL |
| Non-HDL | Less than 130mg/dL |
| LDL | Less than 100mg/dL |
| HDL | 40mg/dL or higher |
What is the recommended cholesterol level?
Normal cholesterol values should be as follows: HDL or good cholesterol: higher than 60 mg/dL, although the more good cholesterol in the blood, the better. LDL or bad cholesterol: below 100 mg/dL and, at most, at a level of 160 mg/dL. Total cholesterol: Levels below 200 mg/dL are recommended.
What is calculated LDL cholesterol?
According to the Harvard Medical School Family Health Guide, your LDL cholesterol is calculated from these results by dividing your triglyceride level by five, then subtracting the result along with your HDL level from the total cholesterol number.
What is the unit of measurement for cholesterol?
Cholesterol is typically measured in milligrams per deciliter (mg/dL). Millimoles per liter (mmol/L) is the standard medical unit for measuring concentrations of substances in blood. It’s used in Canada and some European countries.
How do you calculate total cholesterol?
Once you have these three numbers, you can use them in a simple equation to calculate your total cholesterol. The equation is: LDL + HDL + (triglycerides/5) = total cholesterol. For instance, if you had an LDL of 100, HDL of 60, and triglyceride level of 150, then the equation would read: 100 + 60 + (150/5).