How do you fix a bathtub drain stopper lever?

How to Fix a Pop-Up Drain Stopper

1. Remove the Cover Plate and Plunger. Back out the mounting screws that hold the overflow cover plate to the overflow tube.
2. Clean the Spring. Clean away any debris on the spring at the end of the stopper linkage.
3. Adjust the Connecting Rod.
4. Reassemble the Stopper.

Why does my tub drain stopper not work?

1. The bathtub drain stopper is not working. In most cases, an issue with the bathtub drain stopper is usually because it has disconnected from the spring or plug that connects it to the linkage. This breaks its connection to the trip lever, so the stopper cannot hold water as it should.

What do you do when your bathtub won’t hold water?

If your tub won’t hold water, the problem likely lies in your bathtub drain stopper. Luckily, fixing this issue typically takes about an hour – so you can be back to soaking in a serene bubble bath in no time! The first step to fixing the drain stopper is to remove the drain stopper cover plate.

What is the lever in the bathtub for?

The trip lever is the lever that makes the tub drain go up and down.

What is the silver thing in a tub?

That is the tub drain overflow plate, though it’s actually above the drain, not the faucet. (The opening in this plate leads to a tube that prevents the tub from overflowing by allowing water to run out even if the drain in the bottom of the tub is stopped.)

How do you remove a tub stopper?

Hold the stopper body firmly by hand, and twist the knob counterclockwise to remove it. Usually, you can simply do this by hand, but if the knob is stubborn, you may need to grip the stopper with one pair of pliers while twisting the cap with another pair.

How do you change drain in bathtub?

Apply silicone caulk to the bottom of the new drain basket and place the drain basket inside the drain. Grasp the arms inside the drain basket with a pair of pliers and turn it clockwise to tighten it.

How do you fix a clogged bathtub drain?

One of the first ways to fix a clogged bathtub is to visually inspect the drain for obvious blockages. Sometimes, a small bar of soap or a child’s toy becomes wedged in the bathtub drain and it becomes a simple matter of pulling the blockage out. The object may be stuck a short way down the drain, so careful prodding might dislodge it.

What are the types of bathtub drain stopper mechanisms?

6 Types of Bathtub Drain Stoppers Lift-and-Turn. A lift-and-turn drain stopper is identified by a small knob on the cap of the drain stopper, which is used to twist the stopper open and closed. Push-and-Pull. Toe-Touch. Flip-It. Trip Lever. Pop-Up.