What is an EASA CS?
Certification Specifications (CS) are non-binding technical standards adopted by the EASA to meet the essential requirements of the Basic Regulation. CSs are used to establish the certification basis (CB) as described below.
What is CS standard?
The CS Standard guarantees that the highest of quality service is consistently delivered to our clients. Through our systems, processes and understanding of our client needs, clients are using CooperSummors to simplify the engagement process of identifying, profiling and contracting with industry professionals.
What is a CS 25 airplane?
The CS 25 Large Aircraft Certification training provides the delegates with a basic knowledge of the typical certification processes related to large airplanes. Consideration is given to the technical aspects regarding systems and avionics, cabin and structure; certification topics.
What is CS engine?
In computer programming, an engine is a program that performs a core or essential function for other programs. Engines are used in operating systems, subsystems or application programs to coordinate the overall operation of other programs.
What is FAA certified?
Certification is how the FAA manages risk through safety assurance. It provides the FAA confidence that a proposed product or operation will meet FAA safety expectations to protect the public. Certification affirms that FAA requirements have been met.
What is sfar88?
The acronym stands for Special Federal Aviation Regulation 88. By December 2004, operators must include Federal Aviation Administration (FAA)-approved provisions in their inspection and maintenance programs to assure the safety of their aircraft fuel systems. …
What engine is CSGO on?
Source
Counter-Strike: Global Offensive/Engines
What is engine classification?
Automotive Engines are generally classified according to following different categories: Internal combustion (IC) and External Combustion (EC) Type of fuel: Petrol, Diesel, Gas, Bio / Alternative Fuels. Number of strokes – Two stroke Petrol, Two-Stroke Diesel, Four Stroke Petrol / Four Stroke Diesel.
How does FAA certification work?
The Certification Process Conduct certain ground and flight tests to demonstrate that the airplane meets the FAA standards. Evaluate the airplane to determine the required maintenance and operational suitability for introduction of the aircraft into service.
How do you become FAA certified?
You must complete an application through the Integrated Airman Certification and Rating Application (IACRA) website or by paper using FAA form 8710-1 and submit it to a Flight Standards District Office (FSDO), an FAA-designated pilot examiner, an airman certification representative associated with a part 141 flight …
What are the requirements for a CS-25 certification?
CS-25 BOOK 1. (1) A 90º cross component of wind velocity, demonstrated to be safe for take-off and landing, must be established for dry runways and must be at least 37 km/h (20 kt) or 0·2 VSR0, whichever is greater, except that it need not exceed 46 km/h (25 kt).
What are the flight specifications for CS-25?
CS-25 BOOK 1. (1) A combination of weight, altitude and temperature (WAT) such that the thrust or power setting produces the minimum climb gradient specified in CS 25.121 for the flight condition.
What are the certification requirements for CS-VLA 77?
(c) It must be shown that a safe transition to the balked landing conditions of CS-VLA 77 can be made from the conditions that exist at the 15 m height. CS-VLA 77 Balked landing For balked landings, it must be possible to maintain – (a) A steady angle of climb at sea level of at least 1:30; or (b) Level flight at an altitude of 915 m
How are elevator control forces specified in CS 25.175?
Under the conditions specified in CS 25.175, the characteristics of the elevator control forces (including friction) must be as follows: (a) A pull must be required to obtain and maintain speeds below the specified trim speed, and a push must be required to obtain and maintain speeds above the specified trim speed.