How do brake pliers work?

Using your Brake Spring Pliers to Remove Brake Shoes. Remove the return springs with your brake spring pliers. These springs attach to the brake shoe and the shoe anchor and hold tension on the brake shoe. Once the brake pedal is released, they return the brake shoe to its original position.

What is a brake spring tool?

Lisle Brake Spring Tool for Import Car Brake Return Springs is an engage brake spring in tool head. It turns handle to lock on spring and expands spring to install or remove. It is designed for import car brake return springs; this tool removes and installs import brake return springs.

How do you compress a brake spring?

Start compressing the spring using the vice grips. Tie the zip-tie around the spring, but allow the ends of the spring to be exposed, allowing it to grab. Keep clamping the spring and tightening the zip-tie each time. Repeat until the spring is compressed enough to fit back onto the bracket.

How much is a brake tool kit?

Compare with similar items

How do you use OTC Air brake spring tool?

Simply hook the retaining spring loop and press down. Lever action agains the axle makes the job a snap. Crafted from high-grade materials to ensure quality performance over the lifetime of the tool. Value is at the core of the OTC tool and equipment portfolio.

Which way do you turn a brake adjuster?

Turning the nut on the cable adjuster clockwise will shorten the cable assembly, making it taut. Do this in a few increments at a time, as you don’t want to tighten the cable so much that it makes the shoes drag against the drum. You only want the shoes to engage when the parking brake lever is engaged.

What are brake spring pliers used for?

Product Description Use Brake Spring Pliers to easily remove and install shoe return springs on most drum brakes. Effectively removes and replaces shoe return springs of drum brakes on domestic cars and trucks.

How do I compress my emergency brake spring?

What’s the best way to use brake spring pliers?

Pull the car onto level, solid ground. It is important that your car does not sink or roll away while resting on a jack or on jack stands. Remove hubcaps from the wheels you will be working on. If any of the wheels you will be working on has hubcaps, use a wrench or screwdriver to remove them.

How do you remove springs from a brake shoe?

Remove the return springs with your brake spring pliers. These springs attach to the brake shoe and the shoe anchor and hold tension on the brake shoe. Once the brake pedal is released, they return the brake shoe to its original position. To remove them use the round, notched part of the brake spring pliers.

How do you remove grease cap from brake spring pliers?

Once the lugs are removed, pull the wheel off of the wheelbase. Place wheels under the car as back-up protection in case the jack stands fail. Remove the grease dust cap. This cap will be in the center of the hub and can be removed by simply prying away from the hub. This will expose the retaining nut. Pull out the cotter pin.

Which is better drum brake spring pliers or screwdriver?

Drum Brake Spring Pliers Kit 3 Pc. Easier and safer than using standard pliers and a screwdriver, these specialized brake service pliers come with a spring retainer and adjusting spoon to prevent damage to new brake shoes. We guarantee this product to be free from defects in materials and workmanship 90 days from the date of purchase.