Can you connect a subwoofer with speaker wire?

If you are using your subwoofer with a stereo receiver that lacks a subwoofer output (and many of them do), you can connect the subwoofer using an extra set of speaker cables, as shown above—provided the subwoofer has speaker-level (speaker wire) connections, as the picks in our Best Budget Subwoofer guide do.

How do I connect speaker wire to sub terminal?

Steps for connecting speaker wire to binding post terminals on subwoofers:

1. Strip the speaker wire to about 3/8″ to 1/2″ length bare wire.
2. Push one of the terminals to open the hole.
3. Release the terminal and the wire will be held in place.
4. Repeat for the 2nd or additional terminals.

What type of wire is used for subwoofer?

Regardless of what type of connection is available, be it RCA or direct wired, it is highly recommended to use shielded, heavy gauge cabling specifically designed for subwoofers. Such cables provide a cleaner, more noise-free audio signal.

How do I connect my subwoofer to my speakers?

How to Connect a Subwoofer to Speaker Level Outputs

1. Check the specifications on your receiver.
2. Check the specifications on your subwoofer.
3. Use two speaker wires to connect to the front and back of the sub on the left and right audio channels.
4. Adjust the filter on the subwoofer to clarify the audio.
5. Enjoy the bass.

Why do receivers have 2 subwoofer outputs?

When a receiver has dual subwoofer outputs the two are typically duplicates of each other with a common internal connection. When a receiver has dual subwoofer outputs the two are typically duplicates of each other with a common internal connection. You are therefore free to choose whichever is most convenient.

Can I use electrical wire for speakers?

As everyone has already said, you can use the electric wire for speakers. They’re not interchangeable though; don’t try to wire your house with speaker wire.

What are 5 way binding posts?

Today it is commonly known as a “five-way” or “universal” binding post, which allows many types of connection methods: Banana plugs, inserted into the top open end of the binding post. Bare wire inserted through the same hole and clamped. Bare wire wrapped around the metal post and clamped.

Do you need a special cable for a subwoofer?

Subwoofers do not require any specific form of audio cabling. The specific type of cable needed to connect a subwoofer to an audio system will depend on the audio input jacks built onto the subwoofer itself.

How do I connect my subwoofer to left and right input?

To connect a subwoofer to its receiver, you can use an LFE input cable or an RCA line-in cable (used for left and right input options). Assuming your subwoofer has the option to use an LFE input, this will be your best choice. But, if not, then an RCA input option will work.

Why does my subwoofer have 2 inputs?

Dual input allows the subwoofer an extra sensitivity adjustment. Normally, it would be enough to use a mono LFE subwoofer signal from its processor. By using both inputs with the same mono signal doubles the subwoofer sensitivity. This means that there is now only half the signal strength to drive it to full output.

Why does a subwoofer have a left and right input?

Since the subwoofer is responsible for low bass tones (aka its sole purpose), it requires a transmitter of low-frequency audio waves. The left and right channels are combined in an LFE cable to allow for a singular cable to evenly disperse the signals to the subwoofer.

How do you connect a subwoofer to a receiver?

Connecting Two Subwoofers. First, run a RCA cable from the Subwoofer Pre-Out on the receiver to one of the Subwoofers. Then you plug the other end of the RCA cable from the receiver into the female end of the RCA Y-Adapter and plug the male end of the Y-Adapter into the Line Level Input on the Subwoofer.

What is the best cable for subwoofer?

The Mediabridge CYA-1M2M-8B cable is perfect for the subwoofer and digital audio devices. Its excellent bass response and flexibility to adopt any surface area make it one of the most selling audio cables in the market.

What gauge wire for subwoofer?

The signal and power coming out of your amplifier must not be impeded on their way to your speakers and subs. When you replace or run new speaker wiring, we recommend using: 18-, 16-, or 14-gauge wires for speakers. 16-, 14-, or 12-gauge wires for subwoofers.

What is a subwoofer audio cable?

A subwoofer cable connects an audio amplifier to a speaker designed to reproduce low-frequency sound signals up to 100 Hz. Whether the connection requires a pair of wires or an RCA cable depends on the design features of the particular system.