What is the broadcast IP of the subnet?

A broadcast IP address is only assigned once in each network. It is always the last IP address of the subnet. The network address and the broadcast address are not used as computer IP addresses. In a network, the first address field is reserved for the network and the last for the broadcast address.

How do I assign an IP address to a subnet?

In the Subnets tab, click Create. In the Create Subnet dialog box, specify subnet details, such as the name, subnet IP address or subnet mask, range of IP addresses, gateway address, and broadcast domain. You can specify the IP addresses as a range, as comma-separated multiple addresses, or as a mix of both.

What address is used for Ethernet broadcasts?

The Ethernet broadcast address is distinguished by having all of its bits set to 1. As such, its MAC address is the hexadecimal value of FF:FF:FF:FF:FF:FF. This address is used to transmit data to all of the hosts on the local subnet.

What is an example of a broadcast address?

An IP broadcast address is the highest number in its class; for example, the broadcast address of a Class C 192.168.16.0 network is 192.168.16.255. The broadcast address for a subnet must account for the part of the address that is reserved for the subnet.

What is the broadcast address for subnet4?

The first address in a subnet is the network address and the last number is the broadcast address. Our example IP address is 170.1.0.0. So 170.1.0.0 is network address and 170.1.0.63 is broadcast address.

What is the broadcast address used for?

Broadcast address is the last address in the network, and it is used for addressing all the nodes in the network at the same time. It means that IP packet, where the destination address is broadcast address, is sent to all nodes of the IP network.

What is a valid subnet address?

Valid subnet address: To figure out the valid subnet address, simply subtract the subnet mask from 256 . For example, if you had a Class A mask of 255.240.0.0, the equation would be 256-240=16. The number 16 is the first subnet and also your block size. Keep adding the block size (in this case 16) to itself until you reach the subnet mask value.