Why does my electric shower keep turning off?

There are three common reasons for cut-outs in electric showers. These reasons include low water pressure, triggered thermal cut-outs, and the build-up of limescale. Low water pressure can be fixed with the right shower pump. Thermal cut-outs can be fixed by switching the shower on again or looking for a loose wire.

What is a shower valve with diverter?

Your shower diverter works to ensure water is flowing freely between the showerhead and the bath faucet. These valves are common in older homes that were constructed before built-in valves became the standard.

Why is my Triton shower not getting hot?

There are a few reasons why your Electric shower is not getting hot. First, it can be due to a lack of power supply caused by damaged fuses or switches. Second, it could be that the heating element might have malfunctioned. And finally, it could be caused by a build-up of solid minerals.

Why does my electric shower keep going cold?

If your shower is absolutely cold, what could be causing it is the Thermal Cut-Out (also known as TCO for short), and what happens is if the shower overheats, this cuts off the power to the elements. If this keeps happening though, or indeed the shower gets far too hot, it cuts out completely and will need replacing.

Will low water pressure affect my electric shower?

In some cases, yes. However, the majority of modern electric shower systems are designed for use with a cold mains system with low water pressure. You might need to opt for a pumped electric shower if your cold mains plumbing system features notably low or fluctuating pressure.

How long should electric showers last?

Power showers from the most reliable brand revealed by the results of our survey should last around 4.5 years, compared to just 3.4 years for the least reliable.

Why isn’t my shower heating up?

If the water in your shower isn’t getting hot, the problem could be the temperature control on the water heater. If you have an older unit, the cold water supply dip tube could have deteriorated. In that case, a worn-out dip tube could send cold water up to the hot water feed pipe, resulting in no hot water.

Why is my shower water not getting hot?

The reason why you’re not getting enough hot water from your shower could be because the mixing valve isn’t working. The rubber parts found in the mixing valves get worn down over time, and you will need to replace it.

Do I need a plumber or electrician to install an electric shower?

If you’re installing a new electric shower from scratch, you’ll need to get it installed by a Part P-certified plumber or electrician, who’ll be able to install, upgrade or check the wiring to ensure that the shower works safely.

How long should an electric shower last?

Are there any problems with the Triton shower?

Discuss Triton electric shower problems in the Plumbing Forum | Plumbing Advice area at PlumbersForums.net Not open for further replies. Has anyone else had problems with these showers. Called to loads of these with complaints of going hot and cold.

Why does water keep coming out of my shower diverter?

Common Shower Diverter Valve Problems Three common shower problems can be traced back to a faulty liftgate diverter. First, if the valve is engaged but water continues to come out of the tub spout only, the gate is severely damaged or has fallen out completely.

What causes a liftgate diverter to fail in a shower?

When rod-type diverter valves fail, it’s often because the rubber gasket has dried out and cracked or crumbled. Three common shower problems can be traced back to a faulty liftgate diverter. First, if the valve is engaged but water continues to come out of the tub spout only, the gate is severely damaged or has fallen out completely.

Where does the shower diverter valve go in the tub?

A common type of shower diverter valve attaches to a rod on the tub spout and may also be called a “liftgate.”