What is Sansin SDF?

Sansin SDF Topcoat is a highly protective, exceptionally durable top-coat system that can be applied to any SDF base coat system including SDF Foundation for a fuller, satin-like finish – for substrates including siding, soffits, decks, logs, and timbers.

Is Sansin SDF water based?

But in general, since Sansin stains are water-borne, you want to always flood surface to the point of saturation.

How do I use Sansin SDF?

For best results, apply a flood coat of Sansin SDF, to a point of maximum absorption. Always back-brush the surface a few minutes after application. Continually check the surface; wipe up all puddles and brush out any runs. For additional protection an additional coat of SDF may be applied.

What is SDF wood?

Sansin SDF provides tough, effective protection for wood siding. SDF’s specially formulated oils and resins penetrate into the wood, providing outstanding weather and UV protection in a wide range of natural, semi-transparent and even solid colors.

Is Sansin stain good?

After 9 months, the best-looking stain across all six types of wood decking was Sansin Dec Enviro Stain. But Cutek Extreme performed almost as well, and was much easier to apply, making it the author’s top choice at the midpoint of the testing.

How long does Olympic elite Woodland oil last?

After a little research and some talking with store associates I decided to use Olympic Elite Woodland Oil. When we had this pressure treated retaining wall installed 10 years ago the contractor said it would last about 7 years.

What is high density wood?

High Density Fiberboard (HDF) is an engineered wood product composed of wood fiber extracted from chips and pulped wood waste, formed by glue under immense pressure and heat. Super-Refined HDF (SRHDF) is like HDF, but uses smaller chips and pulped wood waste which results in a stronger and more durable material.

How long does it take for Sansin stain to dry?

of Sansin extender. Allow 1 hour for drying in proper conditions when the temperature is 70°F (21°C) and the relative humidity is higher than 50%. For deeper color request a stronger formula from your dealer. When using a tinted product be sure to stir well before and during application.

Is Olympic Paint going out of business?

Beginning mid-2018, Lowe’s will discontinue selling OLYMPIC brand paints and stains in its U.S. retail stores, according to PPG, which said it received notice from the hardware store chain on Feb. 27. OLYMPIC sales at U.S. Lowe’s locations represents less than $300 million of PPG’s annual sales, per Silvey.

Which is better Behr or Olympic stain?

According to Consumer Reports, Olympic Maximum Solid Stain & Sealant in One is rated in their top solid wood stains category, coming in slightly behind Behr.

What kind of wood finishes does Sansin use?

Sansin is proud to be featured on wood projects and buildings around the world using our water-borne, penetrating interior and exterior wood treatments, stains and finishes. SEE MORE >>

What’s the phone number for the Sansin Corporation?

But if you have something special in mind – something unlike anything else out there – you can call us directly at 0151 495 3111 and we’ll work with you to create just the look you’re after. Some of the things to keep in mind, especially when creating a custom colour, is that it can vary dramatically from one substrate to another.

What kind of SDF is used for wood siding?

Sansin SDF: A penetrating one-coat finish for exterior wood. Penetrating one-coat finish for wood siding. Sansin SDF provides tough, effective protection for wood siding.

What do you need to know about Sansin stain?

Every project is unique. Whatever the requirements of your project, Sansin has an Enviro Stain that will deliver the exceptional beauty and performance your project deserves.