What is air CAP3702I a K9?

AIR-CAP3702I-C-K9 is one of the 3700 series AP, needing wireless controller, providing internal antenna and C regulatory domain. 4 x 4 MIMO (multiple-input multiple-output) technology with three-spatial-stream offers a greater coverage for more reliability and capacity than competing access points.

What is air AP3802I e K9?

AIR-AP3802I-E-K9 Overview AIR-AP3802I-E-K9 is one of the Cisco 3800 Series Access Points. The Cisco Aironet 3800 Wi-Fi access points are designed for large enterprise organizations that rely on Wi-Fi to engage with customers. AIR-AP3802I-E-K9 is designed for Indoor, challenging environments, with internal antennas.

What is the range of Cisco access point?

500 to 1000 feet
Typical 2.4-GHz MAP-to-client distances are 500 to 1000 feet (depends upon the type of access point). Clients are typically laptops, Smart Phones, Tablets, and CPEs. Most of the clients operate in the 2.4-GHz band.

How do I reset my Cisco wireless router?

Reset Router Using Reset Button

1. With the router powered off, connect the power cord to your router, and plug the power cord into your power source.
2. Find the Reset button on the router.
3. Press and hold the Reset button while you power on the router.
4. Release the Reset button after 10 seconds.

How do I increase my access point signal strength?

1. Relocate the Router or Gateway Device.
2. Change the Wi-Fi Channel Number and Frequency.
3. Update the Router Firmware.
4. Upgrade The Router Or Gateway Radio Antennas.
5. Add a Signal Amplifier.
6. Try a Wireless Access Point.
7. Use A Wi-Fi Extender.
8. Try Quality-of-Service Tools.

How do I restart an app?

-Android – Depending on your device manufacturer, either hold the home button until all Apps are displayed or press the “Recents” button and swipe all of the Apps off the side of the screen. 3. Restart just the POWER MUSIC NOW App after ALL Apps have been shut down.

How to factory reset an air cap3502i K9?

You can see the image if you console into the AP and boot it. Holding the mode down for 10 seconds is how you factory reset the AP. Holding it for 30 seconds puts the AP in ROMMON mode. 02-09-2017 06:58 AM

Is the Cisco Aironet 3700 An 802.11ac access point?

With the industry’s only enterprise class 4×4 MIMO, three-spatial- stream access points that support the IEEE’s new 802.11ac specification, the Cisco Aironet 3700 Series delivers industry-leading performance and a High Density Experience (HD Experience) for both the enterprise and service provider markets.

Is there a CLI Command for air cap?

There is no cli command. You need to delete the config and the private config from flash, or else power off the AP, hold the mode button and then power the AP up. Hold the button then for 10 seconds and release. That will factory default your AP. 07-23-2018 08:13 PM 07-23-2018 08:13 PM I want to use this on my home wifi network.